Trying to figure out what some of these mean…
You can use show dot11 assoc to find clients associated to the AP then you can use show dot11 assoc xxxx.xxxx.xxxx to show detailed information for a specific client or even use ‘all-clients’ to show all clients detailed information that are associated to the Access Point.
Here’s the output from show dot11 all-clients
Address : 0023.68b1.b06a Name : NONE IP Address : 0.0.0.0 Interface : Dot11Radio 0 Device : unknown Software Version : NONE CCX Version : NONE Client MFP : Off State : Assoc Parent : self SSID : WiFi VLAN : 101 Hops to Infra : 1 Association Id : 28 Clients Associated: 0 Repeaters associated: 0 Tunnel Address : 0.0.0.0 Key Mgmt type : NONE Encryption : WEP Current Rate : 48.0 Capability : WMM ShortHdr ShortSlot 11h Supported Rates : 1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 Voice Rates : disabled Bandwidth : 20 MHz Signal Strength : -75 dBm Connected for : 299 seconds Signal to Noise : 21 dB Activity Timeout : 16 seconds Power-save : On Last Activity : 44 seconds ago Apsd DE AC(s) : NONE Packets Input : 225 Packets Output : 68 Bytes Input : 11342 Bytes Output : 5154 Duplicates Rcvd : 34 Data Retries : 45 Decrypt Failed : 0 RTS Retries : 0 MIC Failed : 0 MIC Missing : 0 Packets Redirected: 0 Redirect Filtered: 0
I need to find out what “Capability : WMM ShortHdr ShortSlot 11h” means and available options. These clients are connecting at lower speeds when they do not have “WMM” in the Capability column.
