How to Clean Boot Symbol MC9090-G

41PpliNodjL._SY300_909XCLEANBOOT.zip
This file is intended for use when a CLEAN BOOT of an MC909X WM 5.0 device is required. Unzip the contents of this device to either the root of an SD Card (and place the SD Card in your device) OR the TEMP folder. Then follow the UPDATE LOADER boot instructions below.
909XCLEANBOOTANDBLANK.zip
This file is intended for use when both a blank Application Folder and a CLEAN BOOT of an MC909X WM 5.0 device is required. Unzip the contents of this device to either the root of an SD Card (and place the SD Card in your device) OR the TEMP folder. Then follow the UPDATE LOADER boot instructions below.
There are two methods to perform an Update Loader Boot on MC909X:

Method 1

  1. Navigate to the location where the ZIP file was unzipped
  2. Tap StartUpdLdr.exe
  3. After 20 seconds or so, the device will perform an Update Loader boot which will cause the PKGS.LST file deposited on the device to be processed. Leave the device on A/C power during the Update Loader process

Method 2

  1. Press the primary battery release on the mobile computer to partially eject the battery from the mobile computer.
  2. On an MC9090-G, while the battery is partially released, simultaneously press and release the trigger and the Power button.
  3. On an MC-909X-K or MC909X-S, while the battery is partially released, simultaneously press and release the left scan button and the Power button.
  4. Push the battery to fully re-insert it in the mobile computer. One audible click can be heard as the battery is fully inserted.
  5. The mobile computer initializes. During this time press and hold the trigger used on step #2 or step #3 (as appropriate) and place the device on A/C power either by placing it in a cradle or a CAM.
  6. The device will invoke an Update Loader boot, which will cause the PKGS.LST file deposited on the device to be processed. Leave the device on A/C power during the Update Loader process.

 
When the device has completed the process it will return to the Windows Mobile “”Tap the screen to set up your Windows Mobile-based device” screen. At this point, if you used an SD card, please remove it from the device. If you placed the files in the TEMP folder, they will be automatically erased by the CLEAN BOOT process.

Leave a Reply

Your email address will not be published. Required fields are marked *